A panoramic electric fire is a long, low fire with glass on the front and both ends, so the flames can be seen from across the room rather than only straight on. Built into a plastered media wall or chimney breast, it becomes the feature the whole room is arranged around. This guide covers what to look at before you buy, using our Econovex deep range as the example.
Sizes: start with the wall and the TV
All four Econovex deep models are 560 mm high and 300 mm deep. The difference is length. The easiest way to choose is to start with the TV you are mounting above the fire. A fire slightly wider than the screen frames the wall and looks deliberate; a fire narrower than the screen tends to look undersized.
| Model | Recess opening (W x H x D) | Overall size (W x H x D) | Pairs with |
|---|---|---|---|
| Econovex 1270 | 1270 x 560 x 300 mm | 1296 x 570 x 311 mm | 50" to 55" TV |
| Econovex 1600 | 1600 x 560 x 300 mm | 1626 x 570 x 311 mm | 55" to 65" TV |
| Econovex 1800 | 1800 x 560 x 300 mm | 1826 x 570 x 311 mm | 65" to 75" TV |
| Econovex 2000 | 2032 x 560 x 300 mm | 2058 x 570 x 311 mm | 65" to 85" TV |
The model names are rounded. When you build the wall, cut the opening to the recess size in the table: for example, the Econovex 2000 needs a 2032 mm opening.
Three sides of glass, or fewer
Each fire comes with a front glass, two side glass panels and two metal side covers, so the same unit can be fitted four ways:
- 3-sided (bay): front and both ends on show. Ideal for a chimney breast that projects into the room.
- 2-sided (corner): one end covered, for a fire that sits at the corner of a wall.
- Flush: both ends covered, so only the front glass shows.
- Partially recessed: the fire sits partly forward of the wall.
Heat output
The deep range uses a 3kW PTC heater with two settings: low at 1.5kW (5,118 BTU) and high at 3kW (10,236 BTU). The heater only runs while the flame effect is on, and it blows cool air for 30 seconds after you switch it off to protect the unit.
What it costs to run
| How you use it | Low (1.5kW) | High (3kW) |
|---|---|---|
| 1 hour | 39p | 79p |
| A 4-hour evening | £1.58 | £3.16 |
| 4 hours a day for a week | £11.05 | £22.11 |
| 4 hours a day for a month (30 days) | £47.38 | £94.75 |
Worked out at 26.32p per kWh, the Ofgem price cap rate for 1 October to 31 December 2026, with the heater running at full output on that setting. Your own tariff may be different.
For a full breakdown, see our guide to electric fire running costs.
Flame and lighting control
From the remote you can change the colour and brightness of the flames, the ambient light and the ember bed, either together or one at a time. There are flashing modes, a crackle sound you can switch on or off, and a timer from 1 to 9 hours.
Power and installation
The fires are 230V plug-in units with a 2 m cord, so there is no chimney, flue or gas supply to arrange. The manual recommends a dedicated circuit, and the opening should be built into a non-load-bearing wall. Our installation guide walks through the build.
Warranty and delivery
Every fire comes with a 1 year manufacturer's warranty covering manufacturing faults (glass breakage is not covered). Delivery is 5 to 7 working days.
Browse the full panoramic fires range, or contact us with your wall width and TV size and we will recommend a model.
